Search Results

Welcome to EXCAP! 🎉 Let's get your new trackers out of the box and ready for action. This page covers everything in the kit, how to attach the trackers to your body, and a few simple tips to make your first setup smooth and stress-free. What's in the Box Open ...

Great — your trackers are out of the box and ready to wear. Now let's get Excap Studio installed, the drivers ready, and your trackers powered on. Follow the five steps below and you'll be up and running in just a few minutes. 🚀 Step 1: Download Excap Studio G...

Your trackers are connected and Excap Studio is running. Now for the fun part — let's jump into VR and calibrate your body so every movement feels natural. 🎯 Choose Your Connection Mode Select the mode that matches your headset in the top-right corner of Excap...

You did it! 🎉 Your EXCAP trackers are set up, calibrated, and ready to move with you in VR. This page has a few final tips to keep your sessions smooth and pointers on where to go next. You're All Set! You have completed all the startup steps. Put on your head...

This chapter explains how to install Steam and SteamVR, launch Excap Studio in SteamVR mode, verify that your trackers are recognized, and troubleshoot common connection problems. Install Steam and SteamVR Download and install the latest version of Steam from ...

This chapter shows you how to connect your EXCAP trackers to the SlimeVR ecosystem. You will install the SlimeVR Server, route EXCAP data through Excap Studio, and then complete the remaining setup inside SlimeVR. Download and Install SlimeVR SlimeVR is curren...

This chapter covers how to use EXCAP with a standalone headset such as Meta Quest or Pico. You will select Standalone mode in Excap Studio, optionally enter your headset’s IP address, and enable OSC inside VRChat. Select Standalone Mode In Excap Studio, click ...

This chapter explains the three tracking modes available in EXCAP. You will learn the differences between IMU mode, IMU + Magnetometer mode, and IMU + Vision mode, how to enable each one, and how to use the different calibration poses to get the most accurate ...

This chapter covers the tracker-related options in Excap Studio. You will learn how to customize RGB lighting, rename devices, assign body parts, test haptic feedback, save settings to the tracker hardware, and read tracker status information. Customize RGB Yo...

This chapter explains how to connect the EXCAP vision camera to your PC, configure it in Excap Studio, adjust its angle, and use the automatic calibration function in IMU + Vision mode. WiFi Connection Follow the steps shown in the image below to connect your ...

This chapter shows you how to enable haptic feedback in VRChat. You will launch the Excap Space world, copy a haptic-enabled avatar, turn on the OSC and haptics switches, and troubleshoot common problems. Launch the World Search for the world "Excap Space". Ex...

This chapter explains additional setup tasks that are not needed every day. You will learn how to pair a new tracker, replace a tracker, or change the wireless channel to avoid interference when multiple EXCAP systems are used in the same space. Tracker Pairin...

This chapter answers the most common questions about EXCAP, including product features, setup, comfort, compatibility, after-sales support, safety, and privacy. 1. Product Features and Capabilities 1.1 Device Functions Q: What specific tracking functions can t...

This chapter summarizes the planned firmware, hardware, software, and community features for EXCAP. You will learn what improvements and new capabilities are on the roadmap, from over-the-air firmware updates to software integrations and community tools. 📝 Not...

This is the official knowledge base for your EXCAP full-body tracking system — everything you need to go from opening the box to dancing in VRChat with full-body tracking. 🕺 🚀 New Here? Start With Quick Start The fastest way to get going is the Quick Start boo...

简介 EMCAP上位机主要用于定位预览，参数设置，固件升级等。基站可以通过USB/WIFI的方式连接EMCAP上位机 硬件操作 基站 短按按钮开机，启动完毕后会亮起蓝色指示灯 长按按钮3s关机 如果插入usb充电，将会自动开机，亮起紫色指示灯（未充满）或青色指示灯（已充满） 充电时可以通过短按切换开机/关机，关机指示灯将变成红色（未充满）或者绿色（充满），如果充电不使用时建议手动关机以降低发热 注意：当前电池续航较差，建议充满电并插充电宝供电使用是最稳定的，注意如果电池放电到电量很低，即使接着外部供电也可能启动失败...