Advanced Search
Search Results
22 total results found
Excap
Here is docs for excap tracking product
Emcap
EXCAP Beginner Guide
Start here with the supplied eight-Tracker EXCAP kit. Connect the headset camera, calibrate, and reach your first full-body movement in VRChat. Start the Quick Start — follow the setup pages in order. Open Settings and recovery — find detailed controls, maint...
Quick Start
Get your first full-body result in VRChat. Follow this chapter in order: check the kit, wear and bind all eight Trackers, connect the headset camera, then calibrate in Excap and VRChat. Start with Your first full-body moment →
Your first full-body moment
Follow these four pages in order. Your goal is simple: take a step and turn in front of a VRChat mirror, and see your avatar's body follow you. Before starting, have your eight-Tracker kit, a Windows PC, a headset connected to SteamVR and shown as tracked ther...
1. Kit and installation
Lay the kit on a table. The current eight-Tracker set includes eight Trackers, the Excap Link 2.4G Dongle, a camera and its mount/cable, a charger and charging cable, stickers, and the new straps: two long, two medium, and four short. Your shipped Trackers use...
2. Wear and bind
Every Tracker must stay snug while you move. Wear each one with its power button facing up. For the headset camera route, put the marker Trackers on the front of your body so the camera can see the waist/hip and both lower legs. Put one Tracker at the chest, o...
3. Camera and marker lights
The Trackers must already be worn and assigned before this page. The supplied camera connects to 2.4 GHz Wi-Fi only in Headset Mode. Give the camera its network details Connect the camera to the PC with its USB data cable. Open Setting → General → Camera. Wait...
4. Calibrate and VRChat
Connect and put on your headset, then start SteamVR. Wait until SteamVR shows the headset as tracked; just opening SteamVR does not connect the headset. Keep the eight Trackers powered on and assigned to the right body parts. If the headset is not live in Stea...
If your first setup stops
Find the last check that worked. Try its first recovery action before changing any advanced setting. Last thing you saw Check next First action Excap Studio installed, but no Dongle status Setting → About → 2.4G Dongle Driver Reconnect the Excap Link Dongle; u...
Settings and recovery
Use this chapter when you need to configure, maintain, or recover EXCAP. These pages explain Tracker controls, binding, pairing, firmware, magnetometer calibration, haptics, placement, camera modes, and problem reports. Start with Tracker controls and status ...
Tracker controls and status
Open Device to see Trackers connected through the USB dongle. This page explains the settings for one Tracker and the controls above the device list. Example Device page showing eight scripted Tracker cards and the selected Tracker details; not proof of live h...
Device shortcuts and joint binding
Use this page when you want Excap to assign body parts to the Trackers, or when you need one of the extra Device-page shortcuts. Open the right-click menu Open Device. Right-click an open area of the page. Choose the shortcut you need. Example Device screensho...
Pair Trackers
If all your Trackers already appear online in Device, skip this page. Pairing is for a new or replacement Tracker, or for fixing a Tracker that needs a different channel. Keep the Excap Link 2.4G Dongle connected to the PC during pairing. The app connects each...
Update firmware
Firmware updates use a direct USB connection. Update one device at a time and keep it connected until the app says the update is complete. Check the firmware versions Open Setting → About. Find the Firmware card. It shows the current and latest versions and wh...
Magnetometer calibration
Open Setting → General. These switches control device-wide settings. The Tracker detail page has a separate button for calibrating one Tracker's magnetometer. Magnetometer setting card, cropped contiguously from the native Settings screenshot. · Open image at ...
Haptics and vibration
Open Setting → General and find Haptic. Haptics control Tracker vibration. They are separate from magnetometer settings and calibration. Haptic and Hold to Vibrate controls, cropped contiguously from the native Settings screenshot. · Open image at original siz...
Tracker placement
Placement tells Excap which direction a Tracker faces on your body. It does not assign the Tracker to a body part. Use Define or Auto Joint Binding for body-part assignments. Annotated real v2 shell and new strap worn on the body; the power button is facing up...