# Haptic Setting

This chapter shows you how to enable haptic feedback in VRChat. You will launch the Excap Space world, copy a haptic-enabled avatar, turn on the OSC and haptics switches, and troubleshoot common problems.

## Launch the World

Search for the world **"Excap Space"**.

[Excap Space](https://vrchat.com/home/launch?worldId=wrld_22dff5be-1310-4e5d-afd3-428aa2a4b94b)

Use the link above to launch the world. In some cases, the world may not appear directly in search results.

Backup world for testing: [Backup World](https://vrchat.com/home/launch?worldId=wrld_a12c9241-ca01-42c9-ba38-25b1b86e9daa)

![Excap Space](/uploads/images/gallery/2026-07/excap-space-768x385.png)

![Excap Space 2](/uploads/images/gallery/2026-07/f3462408-b9a5-422e-b07a-bba87ff9d19d-768x462.png)

> 📝 **Note:** The Excap Space world provides a pre-configured environment for testing haptic feedback without needing your own avatar setup.

---

## Copy the Haptic Avatar

Inside the world, copy the avatar that has haptic support enabled.

![Copy Avatar](/uploads/images/gallery/2026-07/d68d1f3b-87c1-4033-bab7-22562a36d8a3-768x262.png)

> 💡 **Tip:** If you do not see the copy option, make sure you are using the correct avatar pedestal in the world.

---

## Turn on OSC

Enable the OSC switch in VRChat.

![OSC 1](/uploads/images/gallery/2026-07/72e56bde-6b28-4b8b-b241-15fea5118552-300x265.png)

![OSC 2](/uploads/images/gallery/2026-07/8c7747fd-8d55-47a3-8080-8ef1d0efcb13-300x276.png)

![OSC 3](/uploads/images/gallery/2026-07/a00ef5aa-f725-425f-a364-02165a43edca-300x278.png)

---

## Turn on the Haptics Switch

Enable the haptics switch in VRChat.

![Haptics 1](/uploads/images/gallery/2026-07/b429cbdb-9961-4316-a57a-f5c1c159365d-300x261.png)

![Haptics 2](/uploads/images/gallery/2026-07/00994e9e-8c0f-491f-aad6-6983d4bb5a8f-300x267.png)

![Haptics 3](/uploads/images/gallery/2026-07/405e8fd1-8ab2-4556-b514-6858588a2538-300x289.png)

---

## Enjoy Haptics with EXCAP FBT

The OSC device will be detected automatically. If the trackers do not vibrate, please contact EXCAP after-sales support.

---

## Troubleshooting

### Why is it not working?

**Reason 1:** The automatic OSC discovery may have failed. Enter the VR headset’s IP address manually.

![Manual IP](/uploads/images/gallery/2026-07/c0537a43-6420-460c-8fdd-6acc229e9eca-768x352.png)

> 💡 **Tip:** You can find your headset’s IP address in the Wi-Fi settings on the headset itself.

**Reason 2:** The correct contact point was not touched. The blue circle is the collision detector.

![Collision Detector](/uploads/images/gallery/2026-07/e97f3561-479d-4191-bb0e-ebce3d44e040-169x300.png)

> ⚠️ **Warning:** Haptic feedback only triggers when your avatar’s collision detector overlaps a haptic zone. Make sure you are standing in the correct position.

---

> ⬅️ **Previous:** [Camera Setting](/books/excap-settings/page/camera-setting) · **Next:** [Other Settings](/books/excap-settings/page/other-settings) ➡️