Your first full-body moment

Follow these four pages in order. Your goal is simple: take a step and turn in front of a VRChat mirror, and see your avatar's body follow you.
Before starting, have your eight-Tracker kit, a Windows PC, a headset connected to SteamVR and shown as tracked there, access to a 2.4 GHz Wi-Fi network, and enough clear floor space to stand and take a small step. SteamVR being open by itself is not enough: Excap needs the live headset connection for its SteamVR body-tracking path. Step 1 shows where to install Steam, SteamVR and VRChat if this PC does not have them yet. Keep the PC where you can see Excap Studio while wearing the Trackers.
Check the kit and install Excap Studio. You will finish when the Dongle and eight Tracker cards appear in Device.
Wear and assign all eight Trackers. You will finish when the eight online cards match where you wear them.
Connect the headset camera and check its marker lights. You will finish when the camera says Wi-Fi Online and Camera View shows the front marker groups.
Calibrate and enter VRChat. You will finish when your avatar follows a small step and turn without losing the body for a minute.
If one check fails, use the recovery steps on that page. You can reach the first VRChat body-following moment with IMU tracking while you fix a camera Wi-Fi issue; that path has no camera correction yet. Record exactly which check stopped you so the team can improve the software and guide.
This is a local review draft. The screenshots of connected devices and camera points use scripted example states. The full path still needs a trial with the shipped kit and a first-time user before it can claim a 15-minute setup or independent completion rate.